Our new website is available at new.dizzy.co.za :-).

X
+27 (0)11 022 5323 +27 (0)64 681 8495
Basket/Checkout
R
- -
MagnifierSearch:
NetX Serial to Ethernet Converter (Up)

NetX Serial to Ethernet Converter Industrial devices which implement a serial interface (RS232/RS485) can be connected to a modern Ethernet/LAN network via the NetX Serial to Ethernet converter. The unit is set up via a web-browser interface.
P.O.R. (Approx. R3,900, please contact us for more information)
Price ex. VAT. Est. Weight: 350g. Stock: Lead-time applicable [i]. Decode Icon

Technical Specifications

Serial Interface

Interfaces RS-232: DTE, TxD, RxD, DTR, DSR, DCD, RTS, CTS
RS-422/RS-485: 120R termination for Tx and Rx, RTS/ON control
Baud Rates (bps) 50, 110, 134, 150, 200, 300, 600, 1200, 2400, 3600, 4800, 9600, 19200, 38400, 57600, 115200, 230400
Data Formats 5/6/7/8 bits; odd/even/mark/space/no parity; 1/2 stop bits
Protocol Options - Transparent interface (virtual serial port)
- Serial Bridge (cable replacement)
- Modbus TCP/UDP master/slave - RTU/ASCII
- PPP server
Connector Male DB9 (standard RS-232 / RS-422/485 connector)
Flow Control Options Software (XON/XOFF) / Hardware (CTS/RTS) / None

Ethernet Interface

Interface Ethernet (IEEE 802.3)
Physical Layer 10/100 Base-T
Speed 10/100 Mb/s (auto-detected)
Mode half-duplex or full-duplex (auto-detected)
Protocol Options UDP / TCP/IP
IP Parameter Settings Static IP Address, Subnet Mask, Default Gateway
Max # of TCP Connections 1
Connector RJ45 10Base-T

Miscellaneous

LED Indicators PWR, TxD, RxD, LAN, LINK, DTR
Power Supply 8-32VDC -or- 9-36VDC isolated -or- 18-72VDC isolated -or- PoE
Power Requirements 5W max
Power Connector Pluggable screw clamp (1.5 mm2)
Overvoltage Protection Tranzorb on RS-422/RS-485 line
Operating temperature -25°C to 70°C
Mounting DIN rail 35mm
Dimensions 95x35x80mm

Example Diagram