Our new website is in BETA! If you would like to take a look then please visit new.dizzy.co.za :-).

X
+27 (0)11 022 5323 +27 (0)64 681 8495
Basket/Checkout
R
- -
MagnifierSearch:
Cap Extend click (Go to Parent Category)

Cap Extend click Cap Extend click is a mikroBUS add-on board with a SEMTECH SX8633 low power, capacitive button touch controller. It has 12 pins for connecting capacitive inputs (either touch-buttons or proximity sensors). Any sort of conductive object can be used as an input. Additional 8 GPIO pins, available on the side-edges of the board, can be used as LED drivers. The SX8633 IC integrates a 10 bit ADC - a resolution high enough to support a wide variety of touch pad sizes and shapes to be used with the click. Cap Extend click communicates with the target MCU through the mikroBUS I2C interface, with additional functionality provided by RST and INT pins. Designed to use a 3.3V power supply only.
R310  Qty:
Price ex. VAT. Est. Weight: 20g. Stock: Lead-time applicable [i]. mikroE Icon
CapSense click
CapSense click CapSense click features the CY8C201A0 capacitive sensing module, which takes human body capacitance as an input and directly provides real time sensor information output via I2C. The board contains capacitive sensing elements (5-segment slider and two buttons) as well as two LEDs. The CY8C201A0 capacitive controller has high immunity against radiated and conductive noise. The board can operate at either 3.3V or 5V, with selection by means of SMD jumper.
On SpecialOn SpecialOn Special R190  R275  Qty:
Price ex. VAT. Est. Weight: 20g. Stock: 1 available immediately [i]. mikroE Icon
TouchKey click (Capacitive)
TouchKey click (Capacitive)

Touchkey click has four capacitive pads powered by TTP224, a touchpad detector IC. Capacitive buttons like these can be toggled even when placed under a layer of glass or paper.

On SpecialOn SpecialOn Special R145  R205  Qty:
Price ex. VAT. Est. Weight: 27g. Stock: 1 available immediately [i]. mikroE Icon
Touchpad click (Capacitive)
Touchpad click (Capacitive) Touchpad click is a capacitive touch input device driven by Microchip's low-powered MTCH6102 controller. The touchpad surface is covered with a sheet of black plastic to demonstrate the chip's support for cover layers (up to 3mm for plastic, 5mm for glass) Touchpad click communicates with the target MCU through the mikroBUS I2C interface (SCL and SDA pins), with additional functionality provided by the Interrupt and RSTL pins. Designed to use a 3.3V power supply.
R255  Qty:
Price ex. VAT. Est. Weight: 20g. Stock: Lead-time applicable [i]. mikroE Icon
TouchClamp click (Capacitive)
TouchClamp click (Capacitive) TouchClamp click is a mikroBUS add-on board with NXP's MPR121 proximity capacitive touch sensor controller. It has seven plated holes for clamps which can be used to connect any - literally any - conductive object in order to use it as an input button to send an interrupt to the target board MCU. It's great for creating installations where users interact with the environment in unexpected ways. There's also an extra capacitive button in the middle. TouchClamp click communicates with the target MCU through the mikroBUS INT pin and I2C interface (SCL, SDA). The board has an onboard ADDR. SEL. jumper for choosing I2C addresses. Designed to use a 3.3V power supply only.
On SpecialOn SpecialOn Special R110  R155  Qty:
Price ex. VAT. Est. Weight: 20g. Stock: 1 available immediately [i]. mikroE Icon
Cap Touch click
Cap Touch click

Cap Touch click is a capacitive touch sensing button, integrated on a click board™. It can be activated by touch. This click can sense touch even through plastic, wood, or other dielectric materials, which can be used to protect the surface of the PCB and the sensor pad trace itself. Unlike the mechanical button, the capacitive touch button lasts much longer, it is not prone to damage and wear over time and it is very reliable.

Capacitive buttons are a very popular method of powering up various devices. Besides the aforementioned benefits, having a touch sensitive button on a device allows for a compact design, opens possibilities for various kinds of human-machine interface and - it looks good and modern, especially if accompanied by a LED that turns on when activated, just like the one on Cap Touch click. Cap Touch click can find its place among many applications - for touch activated lighting controls, touch activated control panels, toys and any other applications that need a switch or a button.

R275  Qty:
Price ex. VAT. Est. Weight: 27g. Stock: Lead-time applicable [i]. mikroE Icon